Esun Pla+ Stringing Vers

Esun Pla+ Stringing Vers. I use esun pla+ and is working really good for me. On 8/17/2019 at 1:23 pm, smithy said: Filament is esun pla+ white.

Uitgelicht Esun 1 75mm Blue Pla Filament 1kg Buy Or Lease At Top3dshop

Esun pla+ discussion (print temperatures, strength and stringing issues) printer: I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works. Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering. Esun pla+, ender 3 v2, and constant stringing. On my latest ender 3 pro using cura 4.6 i've used these settings:

Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering.

I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop. 60, retraction 4,5 mm, retraction speed: Esun pla+ discussion (print temperatures, strength and stringing issues) printer: I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop. Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers.

On my latest ender 3 pro using cura 4.6 i've used these settings: My basic settings in cura are: Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range. On my latest ender 3 pro using cura 4.6 i've used these settings: Es bestitzt eine gute materialzähigkeit und eine gute festigkeit... My basic settings in cura are:

On 8/17/2019 at 1:23 pm, smithy said:. No matter what i've tried, cura, prusaslicer, 8mm retraction, 4mm retraction, speeds up to 60 for retraction, speeds down to 25 … Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range. 23.10.2019 · posted august 17, 2019 · esun pla+ stringing/underextrusion. Hotend temp 210, bed temp:. Slicer i'm using is latest version of cura.

23.10.2019 · posted august 17, 2019 · esun pla+ stringing/underextrusion.. Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. Esun pla+, ender 3 v2, and constant stringing. No matter what i've tried, cura, prusaslicer, 8mm retraction, 4mm retraction, speeds up to 60 for retraction, speeds down to 25 … Slicer i'm using is latest version of cura. I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop.. Esun pla+ discussion (print temperatures, strength and stringing issues) printer:

Die qualität des filaments ist durch den gleichmäßigen durchmesser sehr hoch. On 8/17/2019 at 1:23 pm, smithy said:

Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering... I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers. My basic settings in cura are: Slicer i'm using is latest version of cura. On 8/17/2019 at 1:23 pm, smithy said:. I don't think you have to dry the spool, pla is not very sensitive to humidity.

I use esun pla+ and is working really good for me.. Slicer i'm using is latest version of cura. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works. 60, retraction 4,5 mm, retraction speed: Esun pla+ discussion (print temperatures, strength and stringing issues) printer: So like the title says this is what i'm working with (ender 3 v2 and esun pla+). Es bestitzt eine gute materialzähigkeit und eine gute festigkeit. Die qualität des filaments ist durch den gleichmäßigen durchmesser sehr hoch. I use esun pla+ and is working really good for me.

60, retraction 4,5 mm, retraction speed: Es eigenet sich für komplexe 3d druck modelle. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. On my latest ender 3 pro using cura 4.6 i've used these settings: Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion. So like the title says this is what i'm working with (ender 3 v2 and esun pla+). I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works.. Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering.

23.10.2019 · posted august 17, 2019 · esun pla+ stringing/underextrusion.. Es bestitzt eine gute materialzähigkeit und eine gute festigkeit. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. So like the title says this is what i'm working with (ender 3 v2 and esun pla+). My basic settings in cura are: Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering.. I don't think you have to dry the spool, pla is not very sensitive to humidity.

I use esun pla+ and is working really good for me. . So like the title says this is what i'm working with (ender 3 v2 and esun pla+).

Es eigenet sich für komplexe 3d druck modelle. 60, retraction 4,5 mm, retraction speed: Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. Esun pla+, ender 3 v2, and constant stringing. I use esun pla+ and is working really good for me. On my latest ender 3 pro using cura 4.6 i've used these settings: On 8/17/2019 at 1:23 pm, smithy said: 23.10.2019 · posted august 17, 2019 · esun pla+ stringing/underextrusion. Slicer i'm using is latest version of cura.. I use esun pla+ and is working really good for me.

Es bestitzt eine gute materialzähigkeit und eine gute festigkeit... I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool.

Filament is esun pla+ white. 23.10.2019 · posted august 17, 2019 · esun pla+ stringing/underextrusion. I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works. Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Esun pla+ discussion (print temperatures, strength and stringing issues) printer: On my latest ender 3 pro using cura 4.6 i've used these settings:. I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop.

On 8/17/2019 at 1:23 pm, smithy said:. Esun pla+ discussion (print temperatures, strength and stringing issues) printer: Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range. I don't think you have to dry the spool, pla is not very sensitive to humidity.. 60, retraction 4,5 mm, retraction speed:

Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers.. 23.10.2019 · posted august 17, 2019 · esun pla+ stringing/underextrusion.. On 8/17/2019 at 1:23 pm, smithy said:

No matter what i've tried, cura, prusaslicer, 8mm retraction, 4mm retraction, speeds up to 60 for retraction, speeds down to 25 ….. Slicer i'm using is latest version of cura. 23.10.2019 · posted august 17, 2019 · esun pla+ stringing/underextrusion. No matter what i've tried, cura, prusaslicer, 8mm retraction, 4mm retraction, speeds up to 60 for retraction, speeds down to 25 … Es eigenet sich für komplexe 3d druck modelle. My basic settings in cura are: Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion. On my latest ender 3 pro using cura 4.6 i've used these settings: I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works. I use esun pla+ and is working really good for me. Hotend temp 210, bed temp: I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool.

Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering. On 8/17/2019 at 1:23 pm, smithy said:.. Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion.

Slicer i'm using is latest version of cura. 23.10.2019 · posted august 17, 2019 · esun pla+ stringing/underextrusion. My basic settings in cura are: 60, retraction 4,5 mm, retraction speed: Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers. Slicer i'm using is latest version of cura.

Es bestitzt eine gute materialzähigkeit und eine gute festigkeit... Es eigenet sich für komplexe 3d druck modelle. I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop. Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works. On 8/17/2019 at 1:23 pm, smithy said: Die qualität des filaments ist durch den gleichmäßigen durchmesser sehr hoch. So like the title says this is what i'm working with (ender 3 v2 and esun pla+).. I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop.

Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering. On 8/17/2019 at 1:23 pm, smithy said: Esun pla+, ender 3 v2, and constant stringing. I don't think you have to dry the spool, pla is not very sensitive to humidity. I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop. Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion. Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering. Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering.

I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works.. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. 23.10.2019 · posted august 17, 2019 · esun pla+ stringing/underextrusion. Esun pla+ discussion (print temperatures, strength and stringing issues) printer: Slicer i'm using is latest version of cura. Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering. I use esun pla+ and is working really good for me.. Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers.

On 8/17/2019 at 1:23 pm, smithy said:. Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range. I use esun pla+ and is working really good for me. Die qualität des filaments ist durch den gleichmäßigen durchmesser sehr hoch.. So like the title says this is what i'm working with (ender 3 v2 and esun pla+).

I use esun pla+ and is working really good for me.. 60, retraction 4,5 mm, retraction speed: My basic settings in cura are: Es bestitzt eine gute materialzähigkeit und eine gute festigkeit. On my latest ender 3 pro using cura 4.6 i've used these settings: Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament.

I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works. . Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion.

I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop... Slicer i'm using is latest version of cura. Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion. So like the title says this is what i'm working with (ender 3 v2 and esun pla+). I use esun pla+ and is working really good for me. No matter what i've tried, cura, prusaslicer, 8mm retraction, 4mm retraction, speeds up to 60 for retraction, speeds down to 25 … Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. I don't think you have to dry the spool, pla is not very sensitive to humidity. On 8/17/2019 at 1:23 pm, smithy said: Es bestitzt eine gute materialzähigkeit und eine gute festigkeit. Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range. So like the title says this is what i'm working with (ender 3 v2 and esun pla+).

Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament... Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. Slicer i'm using is latest version of cura. Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers. My basic settings in cura are: Es bestitzt eine gute materialzähigkeit und eine gute festigkeit. No matter what i've tried, cura, prusaslicer, 8mm retraction, 4mm retraction, speeds up to 60 for retraction, speeds down to 25 … Esun pla+, ender 3 v2, and constant stringing. Hotend temp 210, bed temp:. Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament.

Slicer i'm using is latest version of cura. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers. Slicer i'm using is latest version of cura. Die qualität des filaments ist durch den gleichmäßigen durchmesser sehr hoch. I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop. Es eigenet sich für komplexe 3d druck modelle. Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering. So like the title says this is what i'm working with (ender 3 v2 and esun pla+). 23.10.2019 · posted august 17, 2019 · esun pla+ stringing/underextrusion.. Slicer i'm using is latest version of cura.

I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works. Die qualität des filaments ist durch den gleichmäßigen durchmesser sehr hoch. Esun pla+, ender 3 v2, and constant stringing. I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works. On my latest ender 3 pro using cura 4.6 i've used these settings: Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers. No matter what i've tried, cura, prusaslicer, 8mm retraction, 4mm retraction, speeds up to 60 for retraction, speeds down to 25 …

My basic settings in cura are: . Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers.

My basic settings in cura are: Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. So like the title says this is what i'm working with (ender 3 v2 and esun pla+). I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop.. 60, retraction 4,5 mm, retraction speed:

I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop. So like the title says this is what i'm working with (ender 3 v2 and esun pla+). On 8/17/2019 at 1:23 pm, smithy said: Slicer i'm using is latest version of cura. Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers. 60, retraction 4,5 mm, retraction speed: My basic settings in cura are: Esun pla+ discussion (print temperatures, strength and stringing issues) printer: Filament is esun pla+ white. I use esun pla+ and is working really good for me. Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. Die qualität des filaments ist durch den gleichmäßigen durchmesser sehr hoch.

So like the title says this is what i'm working with (ender 3 v2 and esun pla+)... On 8/17/2019 at 1:23 pm, smithy said: I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop.. Slicer i'm using is latest version of cura.

Esun pla+ discussion (print temperatures, strength and stringing issues) printer: Filament is esun pla+ white. Die qualität des filaments ist durch den gleichmäßigen durchmesser sehr hoch. 60, retraction 4,5 mm, retraction speed:

Es eigenet sich für komplexe 3d druck modelle... Filament is esun pla+ white. Es eigenet sich für komplexe 3d druck modelle. So like the title says this is what i'm working with (ender 3 v2 and esun pla+). Slicer i'm using is latest version of cura. Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range. I use esun pla+ and is working really good for me. I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works. Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. No matter what i've tried, cura, prusaslicer, 8mm retraction, 4mm retraction, speeds up to 60 for retraction, speeds down to 25 … I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop... Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering.

Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. 60, retraction 4,5 mm, retraction speed: No matter what i've tried, cura, prusaslicer, 8mm retraction, 4mm retraction, speeds up to 60 for retraction, speeds down to 25 … Slicer i'm using is latest version of cura. My basic settings in cura are:

Esun pla+ discussion (print temperatures, strength and stringing issues) printer: On 8/17/2019 at 1:23 pm, smithy said: Es eigenet sich für komplexe 3d druck modelle. So like the title says this is what i'm working with (ender 3 v2 and esun pla+). On my latest ender 3 pro using cura 4.6 i've used these settings: Es bestitzt eine gute materialzähigkeit und eine gute festigkeit. Slicer i'm using is latest version of cura.. Hotend temp 210, bed temp:

I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop. Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers. My basic settings in cura are: Esun pla+ discussion (print temperatures, strength and stringing issues) printer: Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. Hotend temp 210, bed temp: 60, retraction 4,5 mm, retraction speed: Esun pla+, ender 3 v2, and constant stringing. I use esun pla+ and is working really good for me. I don't think you have to dry the spool, pla is not very sensitive to humidity.. 23.10.2019 · posted august 17, 2019 · esun pla+ stringing/underextrusion.

Esun pla+ discussion (print temperatures, strength and stringing issues) printer:. Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers.

So like the title says this is what i'm working with (ender 3 v2 and esun pla+). Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion. So like the title says this is what i'm working with (ender 3 v2 and esun pla+). I don't think you have to dry the spool, pla is not very sensitive to humidity.

I use esun pla+ and is working really good for me.. Hotend temp 210, bed temp: I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool.

I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works.. I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop. Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. Es bestitzt eine gute materialzähigkeit und eine gute festigkeit. Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers. So like the title says this is what i'm working with (ender 3 v2 and esun pla+). On 8/17/2019 at 1:23 pm, smithy said: Slicer i'm using is latest version of cura. My basic settings in cura are:

I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works... Filament is esun pla+ white.

My basic settings in cura are:. Slicer i'm using is latest version of cura. Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering. So like the title says this is what i'm working with (ender 3 v2 and esun pla+).. I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works.

Filament is esun pla+ white. 60, retraction 4,5 mm, retraction speed: Die qualität des filaments ist durch den gleichmäßigen durchmesser sehr hoch. Esun pla+, ender 3 v2, and constant stringing. Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. My basic settings in cura are: Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering.

I use esun pla+ and is working really good for me. On my latest ender 3 pro using cura 4.6 i've used these settings: Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works. On 8/17/2019 at 1:23 pm, smithy said: So like the title says this is what i'm working with (ender 3 v2 and esun pla+). Slicer i'm using is latest version of cura. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop.. No matter what i've tried, cura, prusaslicer, 8mm retraction, 4mm retraction, speeds up to 60 for retraction, speeds down to 25 …

I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop. Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range.. Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion.

No matter what i've tried, cura, prusaslicer, 8mm retraction, 4mm retraction, speeds up to 60 for retraction, speeds down to 25 ….. So like the title says this is what i'm working with (ender 3 v2 and esun pla+). Slicer i'm using is latest version of cura. Filament is esun pla+ white. Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool.. Esun pla+, ender 3 v2, and constant stringing.

My basic settings in cura are: Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range. Hotend temp 210, bed temp: I don't think you have to dry the spool, pla is not very sensitive to humidity.. I don't think you have to dry the spool, pla is not very sensitive to humidity.

Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. On 8/17/2019 at 1:23 pm, smithy said: Esun pla+ discussion (print temperatures, strength and stringing issues) printer: I don't think you have to dry the spool, pla is not very sensitive to humidity. Slicer i'm using is latest version of cura. Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range. Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. On my latest ender 3 pro using cura 4.6 i've used these settings: Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool.. On 8/17/2019 at 1:23 pm, smithy said:

Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers.. Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion. I use esun pla+ and is working really good for me.

23.10.2019 · posted august 17, 2019 · esun pla+ stringing/underextrusion... No matter what i've tried, cura, prusaslicer, 8mm retraction, 4mm retraction, speeds up to 60 for retraction, speeds down to 25 … My basic settings in cura are: 60, retraction 4,5 mm, retraction speed: Die qualität des filaments ist durch den gleichmäßigen durchmesser sehr hoch. Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering.

No matter what i've tried, cura, prusaslicer, 8mm retraction, 4mm retraction, speeds up to 60 for retraction, speeds down to 25 … Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range. Die qualität des filaments ist durch den gleichmäßigen durchmesser sehr hoch. Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion... I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool.

Hotend temp 210, bed temp: Es bestitzt eine gute materialzähigkeit und eine gute festigkeit. Esun pla+, ender 3 v2, and constant stringing. No matter what i've tried, cura, prusaslicer, 8mm retraction, 4mm retraction, speeds up to 60 for retraction, speeds down to 25 …

Es bestitzt eine gute materialzähigkeit und eine gute festigkeit. Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. So like the title says this is what i'm working with (ender 3 v2 and esun pla+). I don't think you have to dry the spool, pla is not very sensitive to humidity. Filament is esun pla+ white. Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers. Es bestitzt eine gute materialzähigkeit und eine gute festigkeit. Hotend temp 210, bed temp: Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion. Esun pla+, ender 3 v2, and constant stringing. 60, retraction 4,5 mm, retraction speed:.. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool.

Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Esun pla+, ender 3 v2, and constant stringing. Esun pla+ discussion (print temperatures, strength and stringing issues) printer: Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers. Slicer i'm using is latest version of cura. Filament is esun pla+ white. Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range. Die qualität des filaments ist durch den gleichmäßigen durchmesser sehr hoch.. Slicer i'm using is latest version of cura.

My basic settings in cura are: Es eigenet sich für komplexe 3d druck modelle. Slicer i'm using is latest version of cura. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Es bestitzt eine gute materialzähigkeit und eine gute festigkeit. I use esun pla+ and is working really good for me. I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop. Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers.

I don't think you have to dry the spool, pla is not very sensitive to humidity. On 8/17/2019 at 1:23 pm, smithy said: Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers. I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works. Esun pla+ discussion (print temperatures, strength and stringing issues) printer: Es bestitzt eine gute materialzähigkeit und eine gute festigkeit.

Slicer i'm using is latest version of cura. Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering. Esun pla+ discussion (print temperatures, strength and stringing issues) printer: Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers. My basic settings in cura are: 23.10.2019 · posted august 17, 2019 · esun pla+ stringing/underextrusion. Es bestitzt eine gute materialzähigkeit und eine gute festigkeit. On 8/17/2019 at 1:23 pm, smithy said:. Esun pla+ discussion (print temperatures, strength and stringing issues) printer:

I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works. Es bestitzt eine gute materialzähigkeit und eine gute festigkeit. On my latest ender 3 pro using cura 4.6 i've used these settings: Hotend temp 210, bed temp: Es eigenet sich für komplexe 3d druck modelle. Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion. Esun pla+ discussion (print temperatures, strength and stringing issues) printer:

Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers.. Esun pla+, ender 3 v2, and constant stringing. Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. Es eigenet sich für komplexe 3d druck modelle. 60, retraction 4,5 mm, retraction speed: On 8/17/2019 at 1:23 pm, smithy said: I don't think you have to dry the spool, pla is not very sensitive to humidity. So like the title says this is what i'm working with (ender 3 v2 and esun pla+). Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering. No matter what i've tried, cura, prusaslicer, 8mm retraction, 4mm retraction, speeds up to 60 for retraction, speeds down to 25 … On my latest ender 3 pro using cura 4.6 i've used these settings:

Esun pla+ discussion (print temperatures, strength and stringing issues) printer:. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. 60, retraction 4,5 mm, retraction speed: Die qualität des filaments ist durch den gleichmäßigen durchmesser sehr hoch. I don't think you have to dry the spool, pla is not very sensitive to humidity. Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range. 23.10.2019 · posted august 17, 2019 · esun pla+ stringing/underextrusion. Esun pla+ discussion (print temperatures, strength and stringing issues) printer: On my latest ender 3 pro using cura 4.6 i've used these settings: Esun pla+, ender 3 v2, and constant stringing. Es eigenet sich für komplexe 3d druck modelle.

Esun pla+, ender 3 v2, and constant stringing.. .. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool.

Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. Hotend temp 210, bed temp: I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop. Die qualität des filaments ist durch den gleichmäßigen durchmesser sehr hoch. Esun pla+ discussion (print temperatures, strength and stringing issues) printer: 23.10.2019 · posted august 17, 2019 · esun pla+ stringing/underextrusion. Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers. No matter what i've tried, cura, prusaslicer, 8mm retraction, 4mm retraction, speeds up to 60 for retraction, speeds down to 25 … So like the title says this is what i'm working with (ender 3 v2 and esun pla+). Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion... Filament is esun pla+ white.

Filament is esun pla+ white. I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. 23.10.2019 · posted august 17, 2019 · esun pla+ stringing/underextrusion. Es bestitzt eine gute materialzähigkeit und eine gute festigkeit. Esun pla+ discussion (print temperatures, strength and stringing issues) printer: No matter what i've tried, cura, prusaslicer, 8mm retraction, 4mm retraction, speeds up to 60 for retraction, speeds down to 25 …. 60, retraction 4,5 mm, retraction speed:

Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers. 23.10.2019 · posted august 17, 2019 · esun pla+ stringing/underextrusion. Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. Es eigenet sich für komplexe 3d druck modelle. Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range. I use esun pla+ and is working really good for me. Esun pla+ discussion (print temperatures, strength and stringing issues) printer: Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion. Filament is esun pla+ white.. Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range.

I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works. Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion. I use esun pla+ and is working really good for me. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Esun pla+ discussion (print temperatures, strength and stringing issues) printer: Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range. Slicer i'm using is latest version of cura. Es bestitzt eine gute materialzähigkeit und eine gute festigkeit.. I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop.

Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range. Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. 60, retraction 4,5 mm, retraction speed: Es bestitzt eine gute materialzähigkeit und eine gute festigkeit. Es eigenet sich für komplexe 3d druck modelle.

Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament.. Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering. I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works. 23.10.2019 · posted august 17, 2019 · esun pla+ stringing/underextrusion. Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion. My basic settings in cura are: Die qualität des filaments ist durch den gleichmäßigen durchmesser sehr hoch. So like the title says this is what i'm working with (ender 3 v2 and esun pla+).. I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works.

Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion... Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range. Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion. Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering. Hotend temp 210, bed temp:.. Esun pla+, ender 3 v2, and constant stringing.

On my latest ender 3 pro using cura 4.6 i've used these settings: . Hotend temp 210, bed temp:

60, retraction 4,5 mm, retraction speed:. Esun pla+ discussion (print temperatures, strength and stringing issues) printer: Esun pla+, ender 3 v2, and constant stringing. Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering. Slicer i'm using is latest version of cura. Das esun pla+ ist ein nicht schädliches, ungiftiges und umweltfreundliches pla filament. Hotend temp 210, bed temp:. I don't think you have to dry the spool, pla is not very sensitive to humidity.

I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works. My basic settings in cura are: Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering. Filament is esun pla+ white. I don't think you have to dry the spool, pla is not very sensitive to humidity. I use esun pla+ and is working really good for me. Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range. Es bestitzt eine gute materialzähigkeit und eine gute festigkeit. I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works. Esun pla+ discussion (print temperatures, strength and stringing issues) printer: Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers. Es eigenet sich für komplexe 3d druck modelle.

Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range... I use esun pla+ and is working really good for me. So like the title says this is what i'm working with (ender 3 v2 and esun pla+). Die qualität des filaments ist durch den gleichmäßigen durchmesser sehr hoch.. Esun pla+, ender 3 v2, and constant stringing.

On my latest ender 3 pro using cura 4.6 i've used these settings: Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering. Esun pla+, ender 3 v2, and constant stringing. Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion. I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop. No matter what i've tried, cura, prusaslicer, 8mm retraction, 4mm retraction, speeds up to 60 for retraction, speeds down to 25 …. Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers.

My basic settings in cura are: . Slicer i'm using is latest version of cura.

Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers. Newbie to 3d printing (using ender 3 and esun pla+) finds out that esun pla+ looks better and is stronger outside of (below) the recommended temp range. So like the title says this is what i'm working with (ender 3 v2 and esun pla+).

Esun pla+, ender 3 v2, and constant stringing. Es bestitzt eine gute materialzähigkeit und eine gute festigkeit. I use esun pla+ and is working really good for me. I've searched google for multiple ways to help with stringing and on this particular brand and materials to which none works. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. My basic settings in cura are: Has anyone had any luck with resolving stringing with esun pla+ filament and would be willing to share any pointers.. So like the title says this is what i'm working with (ender 3 v2 and esun pla+).

Slicer i'm using is latest version of cura. I've done the basics such as lowering temperature, retraction distance/speed, and disabling zhop. On my latest ender 3 pro using cura 4.6 i've used these settings:

No matter what i've tried, cura, prusaslicer, 8mm retraction, 4mm retraction, speeds up to 60 for retraction, speeds down to 25 … Esun pla+, ender 3 v2, and constant stringing. Hotend temp 210, bed temp: Slicer i'm using is latest version of cura. No matter what i've tried, cura, prusaslicer, 8mm retraction, 4mm retraction, speeds up to 60 for retraction, speeds down to 25 … On my latest ender 3 pro using cura 4.6 i've used these settings: Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion. Gleichzeitig ist die materialschrumpfung beim abkühlen des drucks sehr gering. 23.10.2019 · posted august 17, 2019 · esun pla+ stringing/underextrusion. So like the title says this is what i'm working with (ender 3 v2 and esun pla+).. Check your ptfe coupler, when the part is worn out, it presses on the filament and you normally see underextrusion.